ENGINEERING · MANUFACTURING-INSPECTION

Manufacturing & Inspection

制造要求、检测方法和技术边界。

Discuss your application

ENGINEERING QUESTION

设计要求如何转成可制造、可检测、可追溯的技术条件？

公开页面描述能力和方法，不替代订单图样、检验规范和双方确认的验收条件。

REQUIRED INPUTS

1图样、材料和热处理要求
2关键尺寸/载荷/表面项目
3批次、抽样和质量文件要求

EXPECTED OUTPUTS

1制造路线
2检验计划与报告
3批次追溯和放行状态

INSPECTION CHARACTERISTIC DIRECTORY

Manufacturing and inspection characteristics

Category	Characteristic	Method / Scale	Unit	Boundary
dimension	Thickness ss	numeric—	mm	Verify against DIN 6796:2009-08 table 1.
dimension	Total height hh	numeric—	mm	Verify against DIN 6796:2009-08 table 1.
dimension	Reference mass per 1000 piecesm1000	numeric—	kg/1000	Verify against DIN 6796:2009-08 table 1.
dimension	Inside diameter d1d1	numeric—	mm	Verify against DIN 6796:2009-08 table 1.
dimension	Outside diameter d2d2	numeric—	mm	Verify against DIN 6796:2009-08 table 1.
dimension	Outside diameterD / De	variable—	mm	Task 121 product-level inspection characteristic.
dimension	Inside diameterd / Di	variable—	mm	Task 121 product-level inspection characteristic.
dimension	Product thicknesst / t′	variable—	mm	Task 121 product-level inspection characteristic.
dimension	Free heightH0 / l₀	variable—	mm	Task 121 product-level inspection characteristic.
dimension	Cone heighth0 / h₀	derived—	mm	Task 121 product-level inspection characteristic.
engineering_reference	Manufacturer engineering referenceF / sigma / m1000	reference—	—	Approved manufacturer catalog or calculation-workbook summary; reference values do not automatically become Polysplendid acceptance tolerances.
geometry	Coaxiality—	variable—	mm	Task 121 product-level inspection characteristic.
geometry	Flatness—	variable—	mm	The reviewed standards do not define a universal numeric tolerance for every disc spring; use the approved drawing, process card or supply agreement.
geometry	Parallelism—	variable—	mm	The reviewed standards do not define a universal numeric tolerance for every disc spring; use the approved drawing, process card or supply agreement.
material	Hardness—	variable—	—	Task 121 product-level inspection characteristic.
performance	Permanent-set test compression loadFp	numeric—	kN	Verify against DIN 6796:2009-08 table 1.
performance	Minimum residual force after 20 µm releaseFr,min	numeric—	kN	Verify against DIN 6796:2009-08 table 1.
performance	Test loadFt	variable—	N	Task 121 product-level inspection characteristic.

PUBLISHED CONTENT

Manufacturing & Inspection

0 items

No approved content has been published in this subsection.